Tips In Using Pre-Blended Mortar Mix

Most individuals plan DIY tasks to make their homes and properties appealing and strong. And, individuals use reliable materials when building such as cement. However, there are cases when cement is not suitable for such areas. Or perhaps, there are better alternatives for cement like pre-blended mortar mix.

Pre-blended mortar mix is designed for both professional and DIY persons since it is easy to use. In addition, this type of mix is suitable for brickwork, blockwork and stone laying needs. Other than that, homeowners can also use mortar mix in creating letterboxes, paving, retaining walls and garden beds. But, in order to create all of these, it is imperative to know how to use pre-blended mortar mix. To help you, below are some tips you need to know.

Mixing Tips

  • When mixing mortar, make sure your project is properly laid out with all the necessary tools at hand.
  • Next, individuals need to pour the required amount of mortar into a wheel barrow or a clean bucket. It is important to ensure you use contents as soon as possible after opening the product packaging.
  • After which, calculate the amount of water you will need. For each 10kg of Mortar add 1.6 litres of water.
  • Add water gradually and mix thoroughly to a stiff consistency (e.g. until the mix just slips off the trowel when lightly flicked). Note: Excess water can ruin good mortar. Should too much water be added, leave the mixture aside until it thickens to a workable consistency.
  • Finally, the mortar is now ready to trowel onto bricks or blocks.

Storage Tips

In case that you have not used all the pre-blended mix, it is imperative that you store it properly.

Most of the time, can be kept for up to six months if kept in a dry environment, off the ground and providing the bags remain sealed. Individuals must be aware that factors like high temperature and high humidity conditions may reduce the storage life of the product.

Safety Precautions

When using mortar mix, it is also best that you how to safely use it. Below are some safety tips.

During use, avoid inhalation of dust and contact with the skin and eyes. Wear suitable clothing, gloves, eye protection and respiratory protective equipment since it contains cement powders which can be harmful to the skin.

If contact with the skin occurs, individuals need to thoroughly clean the area with plenty of fresh water and soap. Meanwhile, in case of contact with the eyes rinse with plenty of fresh water and seek medical advice. And, if swallowed, seek medical attention immediately. Do not induce vomiting.

These are only some of the essential tips that individuals need to know when using pre-blended mortar mix.

Donna J. Seymour